Ethylene polymerization over supported MAO/(nBuCp)2ZrCl2 catalysts: Influence of support properties

The catalytic system methylaluminoxane (MAO) and bis(n-butylcyclopentadienyl)zirconium dichloride ((nBuCp)₂ZrCl₂) was immobilized on commercial silica, silica-alumina and aluminophosphate calcined at different temperatures. The properties of the supports were determined by using N₂ adsorption-desorption isotherms at 77 K, FT-IR spectroscopy and SEM. After aluminium and zirconium impregnation, the catalysts were analyzed by ICP-AES, FT-IR and UV-vis spectroscopy. Ethylene polymerizations were carried out in a Schlenk tube at 70 °C and 1.2 bar of ethylene pressure. The polyethylene obtained was characterized by GPC, DSC and SEM.Catalysts supported on silica-alumina exhibited higher polymerization activity than those supported on silica and aluminophosphate. Besides, the activity of MAO/(nBuCp)₂ZrCl₂ catalytic system supported on silica-alumina and aluminophosphate decreased strongly with support calcination temperature, while remained almost constant when silica was employed as support. All these experimental features suggest a role of the support acid properties and hydroxyl group population in the generation of active polymerization species.     

Synthesis of hydroporphyrins based on comparative studies of palladium-catalyzed and non-catalyzed approaches

Hydroporphyrins have been synthesized using both Pd-catalyzed and non-catalyzed approaches. Comparative studies of the reaction of tetrasubstituted porphyrins with organolithium reagents in the presence of and without palladium catalysts showed that depending on reagents, the catalyst structure and reactivity of the corresponding porphyrins, chlorins (β-hydroporphyrins) and/or porphodimethenes (meso hydroporphyrins) of 5,10-type can be prepared in reasonable yields. In the absence of Pd catalysts, the formation of chlorins is predominant in the reactions with aliphatic RLi while porphodimethenes are the main products in reactions with PhLi. The use of a palladium catalyst resulted in the formation of both types of hydroporphyrins and the selective formation of either β-mono- or disubstituted chlorins. Of special interest was the reaction of octaethylporphyrin. Here, reaction with t-BuLi in the presence of Pd(PPh₃)₄/CuI proceeded with complete regioselectivity for 5,10-porphodimethenes.     

CH bond activation in the presence or absence of oxygen or nitrous oxide

The reaction of C₂H₆with lattice oxygen, O^2- (in the absence of gaseous oxygen), or “adsorbedℍ oxygen (in the presence of gaseous oxygen) over NiMoO₄ catalysts has been performed and compared to C₃H₈ activation. The results obtained indicate that adsorbed oxygen exhibits a higher reactivity to C₂H₆, while lattice oxygen is more reactive relative to C₃H₈. Kinetic studies of these two reactions in presence of molecular oxygen have indeed shown that the ethane oxidative dehydrogenation (ODH) is dependent on the oxygen partial pressure, whilst on the contrary propane ODH is not. In order to confirm the presence of “adsorbed” oxygen for ethane activation, ODH tests have been performed with N₂O. On increasing temperature, the O^- adsorbed species enhances the mild oxidation of ethane. The activation energy of ethane consumption E_C2H6, relative to propane (E_C3H8 = 133 kJ/mol) is 145 kJ/mol. A possible mechanism is proposed for the oxidative dehydrogenation of ethane. This revised version was published online in August 2006 with corrections to the Cover Date.     

ZrxTixAl1-2xO2的制备及其在三效催化剂上的应用

Zr_0.5Ti_0.5O₂(ZT) and Zr_0.25Ti_0.25Al_0.5O₂(ZTA) mixed oxides were prepared by co-precipitation method and characterized by low temperature adsorption-desorption， XRD and NH₃-TPD. The activity of Pt/Zr_0.5Ti_0.5O₂ and Pt/ Zr_0.5Ti_0.5Al_0.5O₂ catalysts was evaluated using the simulated gases. The results show that ZTA samples exhibit higher specific surface area， larger pore volume and proper surface acidic amount and acidity in comparison with ZT. The results of the catalytic test indicate that Pt/ZT and Pt/ZTA catalysts exhibit excellent low-temperature catalytic activity and lower light-off temperatures of hydrocarbon， carbon monoxide and nitrogen oxides， especially better conversion for nitrogen oxides (NO_x). The addition of Al₂O₃ into ZT enhanced the anti-aging property of Pt/ ZTA catalysts due to the excellent textural， structural， surface acidity and thermal stability.     

Cobaltporphyrin‐adsorbed carbon black: highly efficient electrocatalysts for oxygen reduction

meso‐Substituted cobalt porphyrins adsorbed on carbon black were prepared as catalysts for the electroreduction of O₂. The catalyst, which was prepared by using a homogenizer in mixing cobalt tetraethylporphyrin and carbon black, gave rise to electroreduction of O₂ at a remarkably positive potential (E_p = 0.45 V versus saturated calomel electrode (SCE)) and showed a high selectively for the four‐electron reduction (n = 3.8). Electrochemical study and extended X‐ray absorption fine structure (EXAFS) analysis revealed that the adsorbed face‐to‐face dimeric aggregates of cobalt porphyrin molecules were highly efficient catalysts for electroreduction of O₂. Copyright © 2005 John Wiley & Sons, Ltd.     

Fluoropolyethers end‐capped by polar functional groups. III. Kinetics of the reactions of hydroxy‐terminated fluoropolyethers and model fluorinated alcohols with cyclohexyl isocyanate catalyzed by organotin compounds

The kinetics of the dibutyltin dilaurate (DBTDL)‐catalyzed urethane formation reactions of cyclohexyl isocyanate (CHI) with model monofunctional fluorinated alcohols and fluoropolyether diol Z‐DOL H‐1000 of various molecular weights (100–1084 g mol^?1) in different solvents were studied. IR spectroscopy and chemical titration methods were used for measuring the rate of the total NCO disappearance at 30–60 °C. The effects of the reagents and DBTDL catalyst concentrations, the solvent and hydroxyl‐containing compound nature, and the temperature on the reaction rate and mechanism were investigated. Depending on the initial reagent concentration and solvent, the reactions could be well described by zero‐order, first‐order, second‐order, or more complex equations. The reaction mechanism, including the formation of intermediate ternary or binary complexes of reagents with the tin catalyst, could vary with the concentration and solvent and even during the reaction. The results were treated with a rate expression analogous to those used for enzymatic reactions. Under the explored conditions, the rate of the uncatalyzed reaction of fluorinated alcohols with CHI was negligible. Moreover, there was no allophanate formation, nor were there other side reactions, catalysis by urethane in the absence of DBTDL, or a synergetic effect in the presence of the tin catalyst. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3771–3795, 2002     

DEHYDROGENATION AND AROMATIZATION OF METHANE IN THE ABSENCE OF OXYGEN OVER DOPED Mo/HZSM-5 CATALYSTS

研究了在Ｍｏ／ＨＺＳＭ－５催化剂上添加助剂以及不同的反应预处理温度对甲烷无氧脱氢芳构化反应的影响。实验结果表明，由于第二组分的添加，Ｍｏ／ＨＺＳＭ－５催化剂的活性和选择性都得到了较大程度的改善。预处理温度是影响催化剂反应性能的关键因素。Ｍｏ－Ｒｕ／ＨＺＳＭ－５催化剂经过８７３Ｋ空气预处理后，甲烷在９７３Ｋ的转化率约为１０％，催化剂的稳定性也得到较大程度的提高。ＴＰＳＲ实验结果表明，Ｒｕ的加入降低了芳烃生成的温度。ＴＰＯ和ＤＴＡ实验结果表明，在Ｍｏ－Ｒｕ／ＨＺＳＭ－５催化剂上可生成较多的碳物种，结合反应结果，可以认为反应过程中生成的碳物种对甲烷的无氧脱氢芳构化反应是起积极作用的     

Influence of redox properties on the activity of iron oxide catalysts in dehydrogenation of propane with CO2

Different Fe-containing catalysts (pure Fe₂O₃, Fe₂O₃ supported on active carbon or g-Al₂O₃, and hydrotalcite derived Mg-Fe oxides) were examined in the dehydrogenation of propane performed in an Ar or CO₂ atmosphere at 873 K. A promoting effect of carbon dioxide was found for the Fe₂O₃ and Fe₂O₃/AC samples. The catalytic results are discussed in terms of redox properties of the catalysts determined by temperature-programmed reduction (TPR). This revised version was published online in August 2006 with corrections to the Cover Date.     

硫化态K—Mo合成低碳醇催化剂的制备条件和载体效应研究

用浸渍法制备以KCl为助剂的ZrO_2、γ-Al_2O_3和SiO_2负载硫化态钼基催化剂,研究了钼和助剂钾两种组分浸渍顺序、助剂含量、载体差别以及浸渍溶液的酸碱性对催化剂上CO加氢合成低碳混合醇性能的影响。ZrO_2按先钼后钾、γ-Al_2O_3和SiO_2则按相反的顺序浸渍两种组分、且K/Mo原子比分别为0.5,0.8和1.0制备催化剂,其合成醇活性最佳。由于载体性质的差异,K-Mo/SiO_2、特别是K-Mo/ZrO_2的合成醇活性强烈依赖于钾助剂含量。而K-Mo/SiO_2在较宽的钾含量范围内,其活性差别不明显。适当选择较高碱性的浸渍溶液制备K-Mo/γ-Al_2O_3催化剂,有利于醇活性的提高。     

Synthesis of an enzyme-like imprinted polymer with the substrate as the template, and its catalytic properties under aqueous conditions

Transition state analogues (TSAs) have long been regarded as ideal templates for the preparation of catalytically active synthetic imprinted polymers. In the current work, however, a new type of molecularly imprinted polymer (MIP) was synthesized with the substrate (homovanillic acid, HVA) as the template and hemin introduced as the catalytic center, with the use of plural functional monomers to prepare the active sites. The MIP successfully mimicked natural peroxidase, suggesting that it may not be imperative to employ a TSA as the template when preparing enzyme-like imprinted polymers and that the imprinted polymer matrix provided an advantageous microenvironment around the catalytic center (hemin), essentially similar to that supplied by apo-proteins in natural enzymes. Significantly, by taking advantage of the special structure of hemin and multiple-site interactions provided by several functional monomers, the intrinsic difficulties for MIPs in recognizing template molecules in polar solutions were overcome. The newly developed polymer showed considerable recognizing ability toward HVA, catalytic activity, substrate specificity and also stability, which are the merits lacked by the natural peroxidase. Meanwhile, the ease of recovery and reuse the MIP implies the potential for industrial application.